XZM Ultrafine Mill Features
1. High capacity and low consumption.2. Advanced grinding cavity design.
3. High quality grinding media.
4. Advanced intelligent speed control device.
5. Large range of fineness adjusting.
How does XZM ultrafine mill works?
The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of roller which are rolling in the ring, and are driven by dial through plunger, After being crushed by hammer crusher, the big materials become small size ones and they are sent to storage bin by elevator. The electromagnetic vibrating feeder will send them to the middle of first dial evenly, the materials will be driven to the edge of dial by centrifugal force, and descended, crushed and grinded by rollers. Then the materials will descend into the second and third ring, and crushed and ground. The high pressure centrifugal blower will inhale air from the outside and blow the materials which are ground in the third ring to powder classifier. The rotating turbo in the powder concentrator will make the coarse materials return to the mill and reground, white the fineness will mix with the air and be drawn to the cyclone and be discharged from the discharge valve which is in the bottom 01 II. The air which mixed with very little fineness will be purified by impulse duster and discharged by blower and muffler.
XZM Ultrafine Mill Technical data
| Tab 1: | |||
| item | XZM215 | XZM221 | XZM227 |
| Number of roller(piece) | 15 | 21 | 27 |
| Ring diameter(mm) | Φ600 | Φ800 | Φ1000 |
| Number of ring (piece) | 3 | 3 | 3 |
| main equipment rotate speed(r/min) | 235 | 235 | 235 |
| Max. feed size(mm) | ≤10 | ≤10 | ≤10 |
| Final size (mesh) | 325－2500 | 325-2500 | 325-2500 |
| Capacity(kg/h) | 350-2500 | 600－4000 | 900－6000 |
| Overall size(m) | 10×2×5.5 | 12.4×2.5×6.3 | 18.2×4.7×8.6 |
| Classifier Frequency modulation motor Power (kW) | 11 | 18.5 | 37 |
| Motor of blower Power(kW) | 30 | 45 | 75 |
| Note: If there is any change of above specification, it is all according to the booklet with machine. | |||
| Tab 2: | |||||
| Basic data | Item | Unit | specification | ||
| XZM215 | XZM221 | XZM227 | |||
| Motor of main machine | Model | - | Y225S-4 | Y250M-4 | Y2-315-6 |
| Power | kw | 37 | 55 | 110 | |
| Speed-adjustable motor | Model | - | Y160M-4 | Y180M-4 | Y2VP200L-4 |
| Power | kw | 11 | 18.5 | 37 | |
| Motor of elevator | Model | - | Y100L-4 | Y100L-4 | Y100L-4 |
| Power | kw | 3 | 3 | 3 | |
| Motor of blower | Model | - | Y200L1-2 | Y225M-2 | Y280M-2 |
| Power | kw | 30 | 45 | 75 | |
| Hammer crusher | Model | - | PC250*400 | PC300*400 | PC400*600 |
| Power | kw | 15 | 11 | 18.5 | |
| Electromagnetic Vibrating feeder | Model | - | GZ1F | GZ1F | GZIF |
| Power | kw | 0.06 | 0.06 | 0.06 | |
| Discharge valve | Model | - | ZJD-1：40 | ZJD-1：40 | ZJD-1：40 |
| Power | kw | 0.75 | 0.75 | 0.75 | |
| Pulse deduster | Model | - | DMC72-II | DMC120-II | DMC184-II |
| Power | kw | 5.5 | 7.5 | Y-160L-4-15 | |
| Note: If there is any change of above specification, it is all according to the booklet with machine. | |||||
